Rayline LASER Cutter Machine 100% NEW DESIGN Enclosed Optical Fiber Laser Cutting Machine 1000W Price CNC Fiber Laser Cutter Sheet Metal
Laser cutting machines emit laser light from a beam laser, which is focused into a high-power-density laser beam through an optical path system. The laser beam irradiates the surface of the workpiece, causing the workpiece to reach the melting or boiling point, and at the same time, the high-pressure gas coaxial with the beam blows away the melted or vaporized metal.
Through the movement of the relative position of the workpiece, the material finally forms a cutting seam, thereby achieving the purpose of cutting.
| Fiber Laser Welding Machine | |||||||
| Model | RA-LS3015 | RA-LS4020 | RA-LS6020 | RA-LS8025 | RA-LS12025 | RA-LS12525 | Customized |
| Working Area (mm) | 3000*1500 | 4000*2000 | 6000*2000 | 8000*2500 | 12000*2500 | 12500*2500 | Customized |
| Laser Power | 1000w-20000w | 2000w-30000w | 2000w-30000w | 6000w-50000w | 12000w-50000w | 12000-50000w | Customized |
| Cutting Accuracy | ±0.02mm | ||||||
| Cutting Thickness | 0.2-50mm | ||||||
| Max. Moving Speed | 150m/min | ||||||
| Max. Acceleration | 1.5G | ||||||
| Laser Source | MAX/ RAYCUS/ IPG (Optional) | ||||||
| Laser Cutting Head | OSPRI/ PRECITEC/ RAYTOOL( Optional) | ||||||
| Servo Motor | INOVANCE/ YASKAWA (Optional) | ||||||
| Control System & Software | CYPCUT | ||||||
| Assistant Gas | Conpressed Air/ Oxygen / Nitrogen | ||||||
| Cutting Materials | H-beam steel/Round Steel Pipe/Square Steel Pipe/Channel Steel/Angle Steel | ||||||
Laser cutting uses an invisible beam to replace the traditional mechanical knife. It has the characteristics of high precision, fast cutting speed, not limited to cutting tool restrictions, automatic typesetting to save materials, smooth contours, and low processing costs. It will be gradually improved or replaced. Because the mechanical part of the laser head has no contact with the workpiece, it will not cause scratches on the surface of the workpiece during work; the laser cutting speed is fast, the surface is smooth, and is generally sparse for subsequent processing; the cutting heat-affected zone is small, the plate deformation is small, and the cutting slit is narrow ( 0.1mm~0.3mm); no mechanical stress on the surface, no shearing burrs; high processing accuracy, good repeatability, no damage to the material; CNC programming surface, can process any cross-section, can cut large-format entire panels, consume Opening the mold is economical and time-saving.
(1) Laser cutting has narrow slits, which can save raw materials.
(2) The slit has good verticality and smooth surface. It can be used for part forming and welding without subsequent reprocessing and cleaning;
(3) The trimmed edge has no burrs and no mechanical stress. The heat affected zone is small and basically no deformation
(4) The aspect ratio of laser cutting is large. For metallic materials, it can reach about 20:1, and for non-metallic materials, it can reach more than 100:1.
(5) Laser cutting speed is fast. Low noise. No pollution;
(6) There is no "tool" wear problem during the cutting process, and it is suitable for all materials.
