Author: Martin
RAYLINE LASER Technical Department
Continuous laser cleaning machine is an efficient and environmentally friendly cleaning equipment, suitable for purifying and removing dirt from the surface of various materials. In order to ensure the safe operation of the cleaning machine and extend the life of the equipment, this article will introduce the safe operation and maintenance procedures of the continuous laser cleaning machine.
1. Safety operating procedures
1. Inspection before use
Before using the continuous laser cleaning machine, the following checks need to be carried out:
•Ensure that the working environment of the equipment is well ventilated;
•Check whether the power supply and air source are available and connected properly;
•Make sure the installation location is on a level surface.
2. Precautions during operation
When operating a continuous laser cleaning machine, you need to pay attention to the following matters:
•Protective glasses or face shield must be worn;
•Make sure the beam exit point is not facing people or animals to avoid danger;
•It is prohibited to touch the beam exit with hands;
• Keep no one or animals in the cleaning area during the operation.
3. Precautions after use
After using the continuous laser cleaning machine, you need to pay attention to the following matters:
•Turn off the power and air source of the cleaning machine;
•Items in the cleaning area need to be cooled before being taken out and properly stored;
•The optical lenses of the cleaning machine need to be cleaned and maintained.
2. Maintenance procedures
1. Pre-run inspection
The following checks should be made before each run:
•Clean up dirt and debris in the cleaning area;
•Detect the air source pressure and adjust it to the correct value;
•Check whether the lubricating oil of the cleaning machine is sufficient.
2. Optical lens cleaning
The optical lens of the cleaning machine is a very important cleaning component. The following matters should be noted during the cleaning process:
•First clean the optical lens surface with pure distilled water;
•Use special optical lens cleaner for cleaning;
•After cleaning, wipe it clean in time to avoid leaving any water droplets.
3. Cleaner maintenance
The cleaner of the cleaning machine also needs regular maintenance:
•Clean the dirt on the surface of the washer;
•When the cleaner fails, it should be stopped immediately for inspection;
•Cleaner consumables should be replaced in time, such as cleaning heads, pressure stabilizing valves, etc.
4. Equipment maintenance
Equipment maintenance of cleaning machines is also very important:
•Regularly replace air source filters and pressure regulators;
•Change lubricating oil and cleaning fluid regularly.
3. Precautions for use
•Cleaning machines should be maintained and serviced regularly;
•When using the cleaning machine, you should pay attention to safe operating procedures;
•After using the cleaning machine, relevant cleaning and maintenance should be carried out in time;
•Please perform necessary inspections before operating the cleaning machine.
Conclusion
The above are the safe operation and maintenance procedures for continuous laser cleaning machines. We hope that everyone can follow the above procedures when using the cleaning machine to ensure the safety and longevity of the equipment.